2QYKZ新型永磁可调速双刀矿山机

产品说明:
第九代永磁矿山机，采用“宁德时代”的三相永磁同步电机代替普通电机，更加可靠高效、省电节能。本机智能变频可调速、结果稳、性能高，切割范围可定制。大大提高了开采效率，降低开采成本。
1、采用中国首选品牌宁德永磁同步电机可变转数200~1400转。使用永磁电机降低电能损耗，电机发热量低，提高使用寿命。比普通异步电动机节能10%~20%.

2、增加触摸屏控制，能自动平稳调节切劃速度，减少机械冲击载荷与磨损，锯切稳定，大大提高开采效率。

3、采用特制变频器，防雷击，抗电磁干扰能通过监测电流大小感知石质硬度。

4、切割调速范围宽，大小锯片转速可任意调整，启动转矩大，过载能力大。

5、掏空锯片减轻自重，切割负荷小，可极大降低电能损耗，节约开采成本，大幅度降低电能耗损40%左右。

2QYKZ series Quarry Stone Cutting Machine,
new developed with double main permanent magnet motors regulated by frequency converters, dual big blades and 4 shaft transmission, is powerful and high efficient for mining granite at quarry, also good for mining marble, quartz...
Main Features:
(1) Equipped with powerfull permament magnet motors with high rated speed of 11000 rpm and high reliability.
(2) To regulate the main motors speed by frequency converter, make it possible to adjust cutting speed according to the hardness of the stone cutted.
(3) Productivity improved 10% + higher.
(4) 10-15% energy saving than 2QYKT series.
(5) Safer, more stable.


Why choose Hualong stone mining machine?
* High speed --- It can cut est. 15 sqm/hour, while the wire saw cuts about 10 sqm/hour.
* Low consumption --- It cost about USD1.00/sqm, while the wire saw cost USD1.5-2.3/sqm.
* Quality Assurance
--- Made with 25 years+ expertise and patents.
--- Strictly conforming to ISO9001:2105 quality management system.
* On-purchase Service
--- Many machines available for choice.
--- Customization available
--- Experienced techs for all your questions.
* After-sale Service
--- Parts & Accessories Quick supply for needs
--- Troubleshooting by phone, e-mail, or WhatsApp/Wechat
--- Installation and operation training for any machine
--- Qualified and experienced technicians available to overseas
联系我们，获取完整方案!
Contact us to obtain the complete solution!
福建华隆机械 第九代永磁双刀矿山机，矿山开采设备，矿山锯石机，矿山圆盘锯，矿山切石机。